Cart is empty.
0
Cart:
0,00 €
Primer Cloth – Adhesion Promoter For Strong Bonding Performance
Code:
3Mprimer
- Adhesion promoter for enhanced bonding strength of the adhesive used in our products
- Suitable for rim protection and bumper protection
Product description
Adhesion promoter for enhanced bonding strength of the adhesive used in our products
Suitable for rim protection and bumper protection
Applied to a perfectly degreased surface before bonding the product
It is important that all contact areas are treated with the primer. A thin film of primer is sufficient. Wipe once with light pressure over the rim edge (only over the area where the adhesive will adhere). After the cloth has dried, do not wipe over the applied primer again, as this would remove it. Allow the primer to dry. The drying time is 1 to 3 minutes, depending on room temperature. After the primer has been applied and dried, the product should be bonded within 20 minutes. We recommend wearing protective gloves for this application.
Related products
Recently viewed
© 2025 Aroba e.U. - All rights reserved.